We at Mufflers Specialists Limited are pleased to introduce a one of a kind machine that cleans the heart of any motor vehicle engine. The Envirolution Engine Life-Guard System power-flushes an engine clean, dissolving and removing sludge, varnish, tar and other wear metals. This debris causes an engine to lose performance because its internal parts cannot move freely to create power.

After a flush, oil can flow more freely through the engine, thus providing a stronger oil pressure to the most critical and expensive parts. It is also important to note that when you remove this debris, you decrease engine friction. Your engine will now operate more efficiently, with more power and with better gas mileage.

Most customers have indicated that, immediately after the flush, their car has much more pep than before many say that it runs quieter than ever, it can now get up the hill in one gear less than before and they are filling their tank less often. Most importantly, they can't believe that even after one thousand miles, their oil is still clean and there is no trace of black, dirty oil that is usually seen in the engine.

We are quite sure that this brief introduction to the Envirolution Engine Life-Guard System has sparked some interest, and anticipate your call to our Service Department, and we will provide you with more detailed information about the service.

Diagram showing System Flow

HOW DOES IT WORK?

After the oil is drained, adapters connect the machine to the car through the filter housing and the Drain Plug Port. A heated solution is then pumped under 42 pounds of pulsating pressure throughout the Oil Reservoir, passages, and pump; and back flushes the oil pick up sheen of the engine. The solution is then vacuumed extracted out of the engine, removing the sludge and debris. The Oil Lubricating system of the engine is now clean and can function as originally intended. This process takes approximately 10 minutes.

HOW DOES FLUSHING OUT THE ENGINE IMPROVE THE CAR'S PERFORMANCE AND GAS MILEAGE?

Sludge build up causes the engine to lose performance because internal parts move freely to create power. More freely moving engine parts help increase engine performance. After a flush, oil can flow more freely throughout the engine, thus providing a stronger oil pressure to the most critical and expensive parts to replace. Sludge causes friction, which places a drag on your engine. When you remove Engine Sludge you decrease engine friction. Your engine will now operate more efficiently, with more power, and with better gas mileage.

IF YOU CHANGE THE OIL REGULARLY, WHY DO YOU NEED SERVICE?

Particulates are abrasive grinding materials that increase internal engine friction and wear. Particulates are both the cause and result of Engine Wear. Oil carryovers are the primary source of particulates. Sludge and Debris are hard to remove because they settle and attach in the corners and crevices of the oil pan passageways and in the oil pump. During normal oil change, up to one quart of the used oil (highly contaminated oil), remains in an engine. As new, clear oil is added to an engine, it is diluted with highly contaminated oil. The resulting oil, even before accumulating operating hours, is laden with wear accelerating particulates. Contaminant removal from oil carryovers has not been available maintenance service for internal combustion engines until the development of the Engine Flush System.

WHAT KIND OF RESULT CAN I EXPECT AFTER THE FLUSH IS PERFORMED?

Most customers immediately say that their car has much more pep than before. Many say it runs quieter than ever, it can now get up the hill in one gear les than before, and they are now filling their tank less often. Most importantly, they can't believe that even after one thousand miles their oil is still clean and not black, dirty oil they are used to.